Table of Contents
Advertisement
User Guide
The Telnet Service is not installed.
- Adjust the computer name to 14 characters or less, and then install the Telnet
Service as described below:
1. Click [Run] on Start menu.
2. Type "tlntsvr /service" in the [Open] box, and click [OK].
3. Click Start menu, point to [Control Panel] and click [Computer Management]
and then click the [Services] to specify whether the Telnet Service is registered.
Once the installation of Telnet Service is finished, you can reset the computer
name to 15 characters or more.
Problems with Windows Server 2003 x64 Editions
In some cases, an event log is registered as follows when you install Windows
Server 2003 x64 Editions.
Source: DCOM
Category:Error
Event ID: 10016
Description: The application-specific permission settings do not grant Local Activation
permission for the COM server application with CLSID {555F3418-D99E-4E51-
800A-6E89CFD8B1D7} to the user {NT AUTHORITY\LOCAL SERVICE} SID {S-
1-5-19}.
This security permission can be modified using the component Services administrative
tool.
- The system can be operated normally.
In some cases, an event log is registered as follows when you install Windows
Server 2003 x64 Editions.
Event Source:Service Control Manager
Event Type:Error
Event ID:7011
Description:Timeout (30000 milliseconds) waiting for a transaction response from the
IMAP4Svc service.
- If this event disappears when the system is rebooted, the system can be operated
normally.
Problems with Windows Server 2003 R2
In some case, an event log is registered as follows when you operate Windows
Server 2003 R2.
Source: IPMIDRV
199
www.nec-computers.com
Advertisement
Table of Contents
