Table of Contents
Advertisement
User Guide
For proper cooling and airflow, do not operate the system with
the right side door removed. Always replace the panel before
powering on the system.
8. Remove the processor air duct. See
page 114
9. Locate the CPU socket which you are going to install CPU.
10. Remove the CPU cover.
11. Raise the locking lever on the socket.
Figure 83: Opening the CPU Socket Locking Lever
Open the lever until it stops. The bar can be opened to approxi-
mately. 120 degrees.
Caution
.
Caution
"Removing the Processor Duct Cover" on
161
www.nec-computers.com
Advertisement
Table of Contents
