Table of Contents
Advertisement
User Guide
3. Align the small holes on the cable arm with those on the arm bracket installed
in Step 1, then attach the cable arm to the arm bracket using two screws (D).
Figure 27: Attaching the Cable Arm to the Arm Bracket
4. Press in on the rail release latches and slowly push the server in and out of the
rack several times.
5. Ensure proper movement of the cable arm.
Note that this cable arm can be moved toward the rear of the rack cabinet to
allow cable connection and replacement of the power supply unit.
Check that no excess force is applied to the cable arm by pulling it toward you.
Adjustment of the cable arm hinged brackets may be necessary to attain
smooth operation. Tighten all screws. Ensure the server can be fully closed and
secured to the rack.
1: Cable arm
2: Arm bracket
3: Small hole
Figure 28: Adjusting the Cable Arm Assembly
2
3
54
www.nec-computers.com
1
Advertisement
Table of Contents
