User Guide
Removing the Stabilizers
1. Place the server on its right side (as viewed from the front) on a covered
surface to avoid scratches to the side panel.
2. Remove the eight screws that attach the four stabilizers to the bottom of the
chassis.
3. Remove the stabilizers and save them for future use.
1
Installing the Device and HDD Covers
1. Attach the device covers to the EMI shields protecting the empty 5.25-inch
device bays of the server using the screws securing the EMI shields to the
server chassis.
Figure 10: Removing the Stabilizers
1: Stabilizers
2: Front door
Figure 11: Removing the Device Covers
1: Device cover
1
42
www.nec-computers.com
2