Table of Contents
Advertisement
User Guide
Installing Microsoft Windows Server 2003 x64
Editions
You will need the following for the installation of the Windows Server 2003 x64
Editions:
■ NEC ExpressBuilder CD-ROM
■ Microsoft Windows Server 2003 R2 Standard x64 Edition (CD-ROM) / Microsoft
Windows Server 2003 R2 Enterprise x64 Edition (CD-ROM)
■ User's Guide
■ Getting Started
■ Windows Server 2003 x64 Editions OEM-DISK for NEC ExpressBuilder
Before installing, create Windows Server 2003 x64 Editions OEM-DISK for NEC
ExpressBuilder.
Creating "Windows 2003 x64 Editions OEM-DISK for NEC
ExpressBuilder"
You can create the Windows 2003 x64 Editions OEM-DISK for NEC ExpressBuilder
using one of the following two procedures:
Creating from the menu which appears when running NEC Express5800 Server
with NEC ExpressBuilder
Use this procedure if you have only the NEC Express5800 Server to create the
Windows 2003 OEM-DISK for NEC ExpressBuilder.
■ If you have only the NEC Express5800 Server to create the Windows Server 2003
x64 Editions OEM-DISK for NEC ExpressBuilder, use this procedure.
1. Prepare a 3.5-inch floppy disks.
2. Turn on your NEC Express5800 Server.
3. Insert the NEC ExpressBuilder CD-ROM in the optical device drive.
4. Press Ctrl + Alt + Delete to reboot the server. (You may also turn off and then
on again to reboot the server.)
The system will boot from the CD-ROM and the NEC ExpressBuilder starts.
5. Select [Create Support Disk] from [Tools].
6. Select [Windows Server 2003 x64 Editions OEM-DISK for NEC
ExpressBuilder] from the [Create Support Disk] menu.
7. Insert a diskette in the floppy disk drive according to the on-screen instruction.
Windows Server 2003 x64 Editions OEM-DISK for NEC ExpressBuilder will
be created.
8. Write-protect and label the diskette, then keep it in a safe place.
281
www.nec-computers.com
Advertisement
Table of Contents
