Table of Contents
Advertisement
User Guide
Installing Additional HDD Cage
The figure below shows an example when five or more hard disk drives are to be
connected. The onboard SAS #2 connector is connected to the additional HDD cage.
PCIe #5
PCIe #4
PCI-e #3
PCI #2
PCI -X#1
Installing Internal SCSI File Device
With the standard configuration, you need an optional SCSI controller and internal
SCSI cable to install a file device.
■
Up to two SCSI devices can be installed in the server.
■
To install two half-height SCSI devices in the 5.25-inch
device bay, move the factory-installed DVD-ROM drive to
the top bay.
Some SCSI cables are equipped with terminating resistor. Set "Disabled" for all the
terminating resistors of connected devices. For other setting, refer to the manual
provided with the device.
Figure 94: Additional HDD Cage configuration
Black line = IDE cable
Green line = SAS cable
Caution
182
www.nec-computers.com
5.25-
Option
inch
Option
device
DVD-ROM
bay
HDD cage
(optional)
3.5-inch hard
disk drive bay
Hard disk
drives are op-
tional
Advertisement
Table of Contents
