Table of Contents
Advertisement
User Guide
■
The staff of maintenance service representative is in charge
of collecting memory dump. Customers need only to specify
the memory dump.
■
If any trouble occur after specifying the process below, the
message to inform that the system is in short of virtual mem-
ory may appear, but continue to start the system. If you re-
start the system in such case, memory dump may not be
stored correctly.
Follow the procedure below to specify.:
1. Select [Control Panel] and click [System].
The [System Properties] dialog box is displayed.
2. Select [Advanced] tab.
3. Click [Settings] on the [Startup and Recovery] group box.
Windows Server 2003 x64 Editions
■
We recommend you specify "Complete Memory Dump" to
write the debug information.
If the mounted memory size is larger than 2GB, "Complete
Memory Dump" cannot be specified so we recommend you
specify "Kernel Memory Dump" instead.
■
Specify the drive where there is a free area bigger than the
size of "the memory capacity mounted on Express server +
1MB".
■
If the memory size exceeds 2GB due to added memory,
change the write debugging information to [Kernel Memory
Dump] before adding the memory. The size of the specified
debugging information (memory dump) also changes when
adding memory. We recommend you check (and change, if
applicable) the size of the empty space in the debugging
information (memory dump) write destination drive.
Windows Server 2003 Editions
■
We recommend you specify "Complete Memory Dump" to
write the debug information.
If the mounted memory size is larger than 2GB, "Complete
Memory Dump" cannot be specified so we recommend you
specify "Kernel Memory Dump" instead.
■
Specify the drive where there is a free area bigger than the
size of "the memory capacity mounted on Express server +
12MB". (In case the memory capacity is more than 2GB, a
free area of "2048+12MB" or more).
Caution
Caution
256
www.nec-computers.com
Advertisement
Table of Contents
