Table of Contents
Advertisement
User Guide
6. Insert the Windows Server 2003 x64 Editions OEM-DISK for NEC
ExpressBuilder into the floppy drive, and press Enter .
A list of mass storage devices is displayed.
7. Select the [LSI Logic Fusion-MPT SAS Driver (Server 2003 x64) ] and press
Enter .
8. Select the driver according to your configuration (embedded or external
adapter).
9. When prompted to do so, press Enter to start the "Welcome to Setup" wizard.
Once the installation of Windows Server 2003 x64 Edition is finished, the
system reboots automatically.
10. The [Windows Setup] screen will be displayed once logged on to the system.
■
In some cases, the [Windows Setup] screen may not be dis-
played. However, make sure to install Microsoft Windows
Server 2003 R2 DISC 2 according to the following proce-
dures.
■
Make sure you install Microsoft Windows Server 2003 R2
DISC 2 after the application of "System update". In this case,
note that the [Windows Setup] screen is not displayed.
11. Insert Microsoft Windows Server 2003 R2 x64 Edition DISC 2 CD-ROM into
the DVD-ROM drive. Confirm the parameters and click [OK].
12. When the installation has completed, remove Microsoft Windows Server 2003
R2 x64 Edition DISC 2 CD-ROM from the DVD-ROM drive, and restart the
system.
Caution
284
www.nec-computers.com
Advertisement
Table of Contents
