Table of Contents
Advertisement
User Guide
■ Create Support Disk
The NEC ExpressBuilder CD-ROM contains a number of device drivers and
utilities that you can put on floppy disks and load onto your system.
Use this menu to create a support disk by copying from the NEC ExpressBuilder
CD-ROM. If your system is running a Windows operating system, you may find it
more convenient to use NEC ExpressBuilder for Windows-based to make support
disks
Write the displayed title on the floppy disk label, which is useful for management
in the future. Customers are to provide a floppy disk to create a support disk.
- Windows Server 2003 x64 Editions OEM-DISK for NEC ExpressBuilder
Creates a support disk used for the installation of Windows Server 2003 x64
Editions.
- Windows Server 2003 OEM-DISK for NEC ExpressBuilder
Creates a support disk used for the installation of Windows Server 2003 Standard
Edition and Windows Server 2003 Enterprise Edition. (No need to create this disk
when installing the operating system with the Express Setup.)
- ROM-DOS Startup FD
Creates a support disk used to start the ROM-DOS system.
- Off-line Maintenance Utility Bootable FD
Creates a support disk used to activate the Off-line Maintenance Utility.
■ Setup Maintenance Partition
The Maintenance partition is a specific partition for the server that is created on
your system disk. About 55MB of the maintenance partition includes the various
maintenance utilities and executable commands.
■
Do not reset or turn off the server while running this menu. If
this process is interrupted, the system will not start anymore.
■
The existence of the maintenance partition may be identified
from the operating system. In order to retain the Configura-
tion Data, do not delete the partition.
■
The maintenance partition, once created, cannot be recre-
ated again.
Notes:
Warning
299
www.nec-computers.com
Advertisement
Table of Contents
