Table of Contents
Advertisement
User Guide
2. Make sure that option boards are firmly seated in their respective slots and that
the interior cables are properly connected.
3. Insert the locking fingers on top and bottom of the right side door into their
slots on the chassis.
and securely fastened. A cover sensor (intrusion switch)
monitors the right side door.
4. Slide the right side door forward as far as it will go.
5. Secure the right side door thumbscrews in their holes.
in, reconnect the peripherals, and power on the peripherals and
system.
Figure 43: Installing the Cover
Note: Ensure that the right side door is installed properly
Note: If your system is already set up, plug the system back
A
A: Holes
B: Holes
113
www.nec-computers.com
B
Advertisement
Table of Contents
