Table of Contents
Advertisement
User Guide
7. Press Esc to return to the TOP menu and exit the LSI Logic Software RAID
Setup Utility.
■
Select "Objects" → "Physical Drive" → "Port #X" → "Force
Offline" to cancel the hot spare setting.
■
When two or more hard disk drives (of the same capacity)
are assigned as hot spare, rebuilding starts with the one with
the smaller CH number/ID number.
Check Consistency
1. Run the LSI Logic Software RAID Setup Utility.
2. Select "Check Consistency" from the TOP menu.
Run LSI Logic Software RAID Setup Utility
Perform Check Consistency
Exit LSI Logic Software RAID Setup Utility
The "Logical Drives" screen appears.
Caution
102
www.nec-computers.com
Advertisement
Table of Contents
