Before You Begin; Prepare The Required Hardware And Tools - Ruckus Wireless SmartCell Gateway 200 Getting Started Manual

Before You Begin

Before installing and setting up the SCG, Ruckus Wireless recommends that you
first complete the following pre-installation tasks.

Prepare the Required Hardware and Tools

You must supply the following tools and equipment:
• A switch or router with 10GbE interfaces (for connecting the SCG to the
backbone network)
• A Phillips #1 screwdriver
• A flat head screwdriver
• An administrative computer (desktop or laptop) running Windows 8/7/Vista/XP
or Mac OS X, with a web browser installed (Google Chrome recommended).
Supported web browsers include:
• Google Chrome 15 (and later)
• Safari 5.1.1 (and later)
• Mozilla Firefox 8 (and later)
• Microsoft Internet Explorer 9.0
• A grounded electrical power strip or surge suppressor to protect from circuit
overload
• A standard EIA 19-inch wide rack with an available 2RU space
• Two SFP+ modules (see
will need four SFP+ modules.
NOTE: At the beginning of each procedure, this guide lists the specific tools,
accessories, or equipment that you will need to complete that procedure.
SmartCell Gateway 200 Release 2.5.1 Getting Started Guide, 800-70768-001 Rev A
Preparing to Set Up the SmartCell Gateway 200
Supported SFP+ Modules). For a redundant setup, you
Before You Begin
11