Before You Begin; Prepare The Required Hardware And Tools - Ruckus Wireless ZF7762-AC Installation Manual

Before You Begin

Prepare the Required Hardware and Tools

3
Before You Begin
Before installing and setting up the AP, Ruckus Wireless recommends that you first
complete the following pre-installation tasks.
Prepare the Required Hardware and Tools
You must supply the following tools and equipment:
A notebook computer running Windows 7/Vista/XP/2000 with one wireless 802.11b/
■
g/n network card and one Ethernet card installed
7/16-inch wrench (machine screws)
■
13mm wrench (M8 screws)
■
6mm flathead screwdriver
■
Electric drill with 8mm drill bit (if mounting on a flat surface)
■
A ruler (for measuring the stripped portion of the AC cable)
■
A wire stripper
■
A pair of long-nose pliers
■
NOTE: At the beginning of each procedure, this guide lists the specific tools, accessories,
and equipment that you will need to complete the procedure.
4