Before You Begin; Prepare The Required Hardware And Tools - Ruckus Wireless 7762-T Installation Manual

3

Before You Begin

Before installing and setting up the Access Point, Ruckus Wireless recommends that you
first complete the following pre-installation tasks.

Prepare the Required Hardware and Tools

You must supply the following tools and equipment:
A notebook computer running Windows 2000/XP/Vista/7 with one wireless 802.11b/
■
g/n network card and one Ethernet card installed
A pair of long nose pliers
■
6mm flathead screwdriver
■
6mm Phillips screwdriver
■
10mm ratchet wrench
■
Electric drill with 8mm drill bit (if mounting on a flat surface)
■
NOTE: At the beginning of each procedure, this guide lists the specific tools, accessories,
and equipment that you will need to complete the procedure.
Before You Begin
Prepare the Required Hardware and Tools
5