Boot Menu - NEC Express5800 120Rj-2 User Manual

User Guide

Boot Menu

Feature
USB CDROM
IDE CD
USB FDC
USB KEY
IDE HDD
PCI SCSI
PCI BEV
1. When the BIOS detects a bootable device, it displays the information on the
device in the relevant description.
To boot the server from a desired device, the device must be registered as a
boot device. (Up to eight boot devices can be registered.)
2. Pressing X after selecting a device allows the selected device to be registered
as a boot device or deleted from the registration.
When eight boot devices are registered, no other device can be registered as a
boot device, even if you press X . To register another device as aboot device,
you first need to delete the reigstration from a device which is not anymore
used to boot.
Pressing Shift + 1 after selecting a device enables/disables the selected device.
3. You can change the boot priority (first to eighth) of each device by using the up
and down arrow keys, and + and/or –.
To change the priority of a device, move the cursor to the device by using the
up and down arrow keys, and press + or –.
Table 20: Boot Menu
Description
USB CD-ROM drive
ATAPI CD-ROM (including DVD-ROM drive)
USB floppy disk drive
USB flash memory device
IDE hard disk drives
Internal hard disk drives installed in your system ("Software RAID" is dis-
played in the RAID configuration.)
IBA GE Slot xxxx
Onboard LAN.
LAN1: Slot 0C00, LAN2: Slot 0C01
Other indication
Optional PCI board connected to the riser module.
81
www.nec-computers.com