NEC Express5800 120Rj-2 User Manual page 117

User Guide
4. A new DG is defined in the Disk Groups frame. Define another DG in the
similar procedures. Once the DGs have been defined, click [Next] at the lower
right of the screen.
5. Configure a RAID10 (spanning of RAID1) using the two DGs that have been
created in the previous step. When DGs are defined, the [VD Definition]
screen is displayed.
Figure 66: Span Configuration Wizard (4)
Figure 67: Span Configuration Wizard (5)
117
www.nec-computers.com