NEC Express5800 120Rj-2 User Manual page 79

User Guide
BMC LAN Configuration Submenu
Feature
IP Address
Subnet Mask
Default Gateway
DHCP
Web interface
HTTP
HTTP Port Number
HTTPS
HTTPS Port
Number
Command Line
Interface
Telnet
Telnet Port Number
SSH
SSH Port Number
Clear BMC
Configuration
Notes on performing Clear BMC Configuration
■
Executing "Load Setup Defaults" in BIOS SETUP utility does
not restore the default value for settings related to manage-
ment LAN of BMC. To restore the default value, you need to
execute Clear BMC Configuration.
Table 18: BMC LAN Configuration Submenu
Choices or Description
Display Only
192.168.001.001 Specifies an IP address for the
management LAN.
255.255.255.000 Specifies a subnet mask for
management LAN.
000.000.000.000 Specifies a default gateway for
the mangement LAN.
Disabled Set it to Enabled to obtain an
IP address from the DHCP
Enabled
server automatically.
To specify an IP address
manually, set it to Disabled.
- -
Disabled Set it to Enabled to use HTTP
communication for the Web
Enabled
interface.
80 Specifies the TCP port number
which the management LAN
uses for HTTP communication.
Disabled Set to [Enabled] to use HTTPS
communication for Web
Enabled
interface.
443 Specifies the TCP port number
which the management LAN
uses for HTTPS
communication.
- -
Disabled Set to [Enabled] to use Telnet
communication as a command
Enabled
line interface.
23 Specifies the TCP port number
to be used for Telnet
communication.
Disabled Set to [Enabled] to use SSH
communication as a command
Enabled
line interface.
22 Specifies the TCP port number
to be used for SSH
communication.
Press Enter and select "Yes" to
initialize the BMC configuration.
Caution
79
www.nec-computers.com
Your Setting