Powering On Your System - NEC Express5800 120Rj-2 User Manual

User Guide

Powering On Your System

■
If the power cord is connected to a power control device
such as a UPS (Uninterruptive Power Supply), make sure
that the power control device is powered.
■
Do not turn off the server until characters following the Boot-
BIOS logo appears on the screen.
Power on your system as follows.
1. Make sure all external devices, such as a video display, keyboard, and mouse
(optional) have been connected, and the power cords are connected.
2. Power on the video display and any other external devices.
control unit such as an UPS (Uninterruptible Power Supply)
make sure that the power control unit is powered on.
3. Make sure no bootable media in inserted into the optical drive.
4. Press the POWER switch (A) on the front of the computer chassis to power on
the system. The POWER lamp (B) lights green. If it is not lit, ensure the ac
power cord is connected to a functional ac power source.
After a few seconds your system begins the internal Power-On Self Tests (POST).
POST automatically checks the system board, CPU(s), memory, keyboard, mouse, and
most installed peripheral devices. POST also displays the start messages of the BIOS
setup utility during execution.
The POST check results should be checked in the following cases:
Note: If the server power cord(s) is connected to a power
0
1
2
Caution
B
3
4
5
54
www.nec-computers.com
A