NEC Express5800 120Rj-2 User Manual page 100

User Guide
Item
Battery Backup
Set Factory Defaults
Cluster Mode
Rebuild Rate
Patrol Read Rate
BGI Rate
CC Rate
Reconstruction Rate
Adapter BIOS
Coercion Mode
PDF Interval
Alarm Control
Cache Flush Interval
Spinup Drive Count
Spinup Delay
StopOnError
Stop CC On Error
Maintain PD Fail
History
Schdule CC
*1Do not perform "Set Factory Defaults". If performed, the factory-set values can no
longer be restored.
Table 24: Default settings and their explanation
default Description
Present Displays Properties.
None When battery is installed: Present
When battery is not installed: None
No Restores vendor's factory defaults.
Yes
Disabled –
30 Recommended value: 30
30 Recommended value: 30
30 Recommended value: 30
30 Recommended value: 30
30 Recommended value: 30
Enabled –
Disabled
None –
128MB-way
1GB-way
300 –
Disabled Disabled:Does not issue an alarm.
Enabled
Silence
4 –
2 –
12 –
Disabled –
Enabled
No Specify the operation at error detection in
Consistency Check.
Yes
No: Recover and resume.
Yes: Abort
Disabled –
Enabled
Supported Set the scheduled Consistency Check.
100
www.nec-computers.com
Change
–
Prohibited *1
Prohibited
Permitted
Permitted
Permitted
Permitted
Permitted
Prohibited
Prohibited
Prohibited
Prohibited *2
Prohibited
Prohibited
Prohibited
Prohibited
Permitted
Prohibited
Permitted