User Guide
12. Insert the backup device into the device carrier.
Figure 175: Inserting the Backup Device into the Device Carrier
13. Secure the backup device with the provided screws.
Tighten two screws on each side.
Figure 176: Securing the Backup Device with Screws
■
Be sure to use the screws provided with the backup device.
■
Position the backup device so that the device screw holes
align with the screw holes in the device carrier.
■
If you find it difficult to connect the cable of a long device,
slide the device to the front in order to connect the cable.
A: Screw hole not used
Notes:
A
205
www.nec-computers.com