Security Menu - NEC Express5800 120Rj-2 User Manual

User Guide

Security Menu

password for entering Setup. The passwords are not case
sensitive.
Feature
Security Chip
Configuration
Supervisor
Password is
User Password is
Set Supervisor
Password
Set User Password
Password On Boot
Fixed Disk Boot
Sector
Power Switch Inhibit Disabled
Note: Enabling the Supervisor Password field requires a
Table 13: Security Menu
Choices or
Display Only
Set
Clear
Set
Clear
Up to 8
alphanumeric
characters
Up to 8
alphanumeric
characters
Disabled
Enabled
Normal
Write Protect
Enabled
Description
Displays the Security Chip
Configuration Submenu.
Indicates whether the
supervisor password is set
(display only).
Indicates whether the user
password is set (display only).
Press Enter to display the
supervisor password entry
screen. With the supervisor
password, all SETUP menus
are available for access. This
option is available only when
you log into the SETUP utility
with the supervisor password.
Press Enter to display the user
password entry screen. With a
user password, only certain
menus are accessible. This
option is available only if the
Supervisor Password is set.
Specify whether to request a
password entry at boot-up.
Administrator password setup
is required.
Only available if supervisor
password is set.
Allows to write protect hard disk
boot sector to protect against
viruses.
Enables or disables the power
switch.
When set to Enabled, once the
operating system has started,
you cannot turn off the system
using the power switch. Forced
shutdown is also unavailable.
See "Forcing a Power
(
Shutdown" on page 58.
73
www.nec-computers.com
Your Setting
)