Windows Dr. Watson - NEC Express5800 120Rj-2 User Manual

User Guide
Correct debug information might not be collected due to a
virtual memory shortage when the paging file is insufficient,
so set a paging file size large enough for the entire system.
■
For more information on the "Recommended" value, see
"About the System Partition Size" on page
■
If the memory is expanded, re-specify the paging file to suit
the new memory size.
9. Click [OK].
A message prompting to restart the system may appear according to the
modified specification. In such a ase, restart the system.

Windows Dr. Watson

Windows Dr. Watson is a debugger for application errors. If any application error is
detected, Dr. Watson diagnoses the server and logs the diagnostic information (log).
Follow the procedure below to instruct Dr. Watson to collect diagnostic information.
1. Click [Run] on Start menu.
2. Type "drwtsn32.exe" in the [Open] box, and click [OK].
The [Dr. Watson for Windows] dialog box appears.
3. Specify the location in which to store the diagnostic information in the [Log
File Path] box.
The
"DRWTSN32.LOG".
a local computer.
4. Specify the location of the crash dump file in the [Crash Dump] box.
with Windows Debugger.
5. Check the following check boxes on the [Option] box.
- Dump Symbol Table
- Dump All Thread Contexts
- Add To Existing Log File
- Create Crash Dump File
For more information on each of the above functions, refer to the Online Help.
6. Click [OK].
diagnostic information
Note: You can not specify a network path. Specify a path on
Note: "Crash Dump File" is a binary file that can be read
293.
will be stored
315
www.nec-computers.com
with the file name