NEC Express5800 120Rj-2 User Manual page 172

User Guide
■
Check that the top end of the PCI board bracket is inserted
in the designated slot of the riser card.
■
Some PCI boards have a terminal section that extends over
the mating connector.
10. Secure the board with the screw removed earlier.
11. Insert the riser card into the slot on the motherboard.
Align the riser card terminal section with the slot on the motherboard, and
firmly push the riser card until it is fully seated.
Notes:
Low-profile type
Figure 125: Securing the PCI Card with a Screw
Figure 126: Installing the Riser card Assembly
Full-height type
172
www.nec-computers.com