Installing Microsoft Windows Server 2003 X64 Editions; Creating The "Windows 2003 X64 Editionsoem-Disk For Nec Expressbuilder - NEC Express5800 120Rj-2 User Manual

User Guide
Installing
Microsoft Windows Server 2003 x64 Editions
You will need the following for the installation of the Windows Server 2003 x64
Editions:
■ NEC ExpressBuilder DVD
■ Microsoft Windows Server 2003 R2 Standard x64 Edition (CD-ROM) / Microsoft
Windows Server 2003 R2 Enterprise x64 Edition (CD-ROM)
■ Microsoft Windows Server 2003 x64 Editions Service Pack 2 (CD-ROM)
■ User's Guide
■ Getting Started
■ Windows Server 2003 x64 Editions OEM-Disk for NEC ExpressBuilder
Before installing, create Windows Server 2003 x64 Editions OEM-Disk for NEC
ExpressBuilder.
Creating the "Windows 2003 x64 EditionsOEM-Disk for NEC
ExpressBuilder"
You can create the Windows 2003 x64 Editions OEM-Disk for NEC ExpressBuilder
using one of the following two procedures:
Creating from the menu which appears when running NEC Express5800 Server
with NEC ExpressBuilder
Use this procedure if you have only the NEC Express5800 Server to create the
Windows 2003 OEM-Disk for NEC ExpressBuilder.
1. Prepare a 3.5-inch floppy disks.
2. Turn on your NEC Express5800 Server.
3. Insert the NEC ExpressBuilder DVD in the optical device drive.
4. Press the reset switch or press Ctrl + Alt + Delete to reboot the server. (You
may also turn off and then on again to reboot the server.)
The system will boot from the DVD and the NEC ExpressBuilder starts.
5. Select [Create the OEM-Disk for Windows] from the [Tools Menu].
6. Select [Create a Windows Server 2003 x64 Editions OEM-Disk for NEC
ExpressBuilder] from [Create OEM-Disk] and click [Perform].
7. Insert a diskette in the floppy disk drive according to the on-screen instruction.
Windows Server 2003 x64 Editions OEM-Disk for NEC ExpressBuilder will
be created.
8. Write-protect, label the diskette, then keep it in a safe place.
344
www.nec-computers.com