NEC Express5800 120Rj-2 User Manual page 50

User Guide
1. Plug the provided power cord into the power receptacle on the rear of the
server.
2. Plug the other end of the power cord into the wall outlet. The AC power LED
on the power supply turns green and flashes.
comes with your server.
To connect the power cord from the server to an uninterruptible power supply (UPS),
use service outlets on the rear of the UPS. Refer to the manual that comes with the
UPS.
To power on the server from the UPS (Uninterruptible Power Supply), select [Server] -
[AC-LINK] - [Power On].
Change a parameter for "AC-LINK" under the Server menu of the BIOS SETUP utility.
See
"BIOS Setup Utility" on page 64
Figure 24: Plugging the power cord
A: AC Power LED
Note: Secure the power cord with an AC cord holder that
A
for details.
50
www.nec-computers.com