NEC Express5800 120Rj-2 User Manual page 48

User Guide
5
6
1 Serial Port 2
2 Front USB Ports (x2)
3 LAN Connectors 1 &2
4
Serial Port 1
5 Management port
6 PS/2 Keyboard Port
7 PS/2 Mouse Port
8 VGA Port
9 Rear USB Ports (x2)
10 Power Inlet
0
1
2
3
4
A
9
8
7
Figure 23: System Connections
Connect a device with a serial interface (e.g. Management PC)
Note: A leased line cannot be connected directly to this connector.
Connect any USB device.
USB keyboard and mouse are not supported
Connect a device with a serial interface
Note: a Management PC cannot be connected on this port, but only to
serial port B (BIOS Setup changes are required). A leased line cannot be
connected directly to this connector.
Connect your network or hub.
Connect a PS/2 keyboard, using the provided "Y" cable.
Connect a PS/2 mouse, using the provided "Y" cable.
Connect the monitor.
Connect any USB device.
Note: USB keyboard and mouse are not supported
When all peripherals are connected, finally connect the provided power
cable to a 15 A rated wall outlet or to a BackUPS
48
www.nec-computers.com
3
4
5
10
1
2