Appendix 8: Equipment Log - NEC Express5800 120Rj-2 User Manual

User Guide

Appendix 8: Equipment Log

Use this equipment log form to record pertinent information about your system. You
will need some of this information to run the System Setup Utility. Be sure to update
the equipment log when you add options.
Record the model and serial numbers of the system components, dates of component
removal or replacement, and the name of the vendor from whom the component was
purchased. Be sure to record the same information for any components added to the
system, such as a power supply, hard disk drives, add-in boards, or printers.
Record the model and serial numbers of the unit and system board. The model and
serial numbers of the system unit are recorded on a label attached to the rear of the unit.
The location of serial numbers on add-in boards, hard disk drives, and external equip-
ment, such as video displays or printers, varies from one manufacturer to another. Lit-
erature accompanying these products should illustrate or describe the location of model
and serial numbers.
361
www.nec-computers.com