User Guide
About Express Setup
"Express Setup" helps you install the Windows Operating System. The setup
automatically configures the RAID system and installs the Operating System and some
management software.
Executing the Express Setup erases all data on the hard disk drive.
You can also use the "Parameters File" during "Express Setup" in order to save or
backup the installation parameters.
If you want to set up the server using parameters defined previously, execute the
Express Setup using an existing parameters file.
■
If you want to create a parameters file, have a blank floppy
disk (MS-DOS 1.44MB format) ready.
■
When using a floppy disk, a USB floppy disk drive is
required.
Notes:
Caution
289
www.nec-computers.com