NEC Express5800 120Rj-2 User Manual page 225

User Guide
- Reinstall the optical disc drive bay.
Inserted the correct optical disc but an error message is displayed:
The CD-ROM is not inserted or the wrong CD-ROM is inserted.
Please insert the correct CD-ROM.
OK
■ Is the data side of the optical disc dirty or injured?
- Take the optical disc out of the optical disc drive, check that it is not dirty or
injured, reset and click [OK].
Fail to access the hard disk
(Refer to the documentation supplied with the RAID controller.)
■ Is the hard disk applicable to the server?
- Operation of any device that is not authorized by NEC is not guaranteed.
■ Is the hard disk properly installed?
■ Is the hard disk properly configured?
Fail to access the (internal or external) SCSI devices:
■ Is the SCSI device applicable to the server?
- Operation of any SCSI device that is not authorized by NEC is not guaranteed.
■ Is the cable connection changed?
■ Are SCSI devices properly configured?
- When the server has external SCSI devices connected, devices settings, includ-
ing SCSI ID and terminator, are required. Refer to the manual that comes with
the SCSI device for details.
■ Is cable length exceeded?
- Refer to the manual that comes with the SCSI device for details.
■ Are the optional SCSI controllers properly configured?
- When the server has an optional SCSI controller installed and SCSI devices
connected to it, use the BIOS Setup utility that comes with the optional SCSI
controller for proper configuration. See the manual that comes with the optional
SCSI controller for details.
Event logs in using Intel Network adapter teaming
Event Type:
Event Source:
Event Category:
Warning
IANSMiniport
None
225
www.nec-computers.com