Parameter File Creator; Parameters File - NEC Express5800 120Rj-2 User Manual

User Guide

Parameter File Creator

"Parameter File Creator" is a tool to create the [Parameters file] that is used for
configuring the server with the Express Setup (see
Operating System with Express Setup" on page 288
If you use the Parameters file created by the Express Setup and the Parameter File
Creator to operate the setup, the setup can be done automatically except for a few key
inputs to confirm the specification. You can also install the system with the same
specifications as before when re-installing the system. We recommend you create a
[Parameters file] to setup the servers from the NEC ExpressBuilder.
When using a floppy disk, a USB floppy disk drive is required.
You cannot create a [Parameters file] for Microsoft Windows
Server 2003 x64 Editions.
[Parameters
the[Parameters
ExpressBuilder.

Parameters File

This section describes how to specify the setup information that is necessary for the OS
installation and creation using a Parameters File.
Follow the procedure below.
Do not remove the NEC ExpressBuilder DVD from the drive
during the parameters file creation.
1. Start the OS.
2. Insert the NEC ExpressBuilder DVD into the optical disc drive.
The menu appears.
Note: You can install Windows Server 2003 without a
file]. Also,
file] during
"Appendix 5: Installing the
for details).
Caution
you can modify/newly
the setup with
Caution
272
www.nec-computers.com
create
the NEC