Graphics Accelerator Driver; Scsi Controller Driver; Installing Sas Controller Driver (Lsi Sas3443E-R) - NEC Express5800 120Rj-2 User Manual

Hide thumbs Also See for Express5800 120Rj-2:
Table of Contents

Advertisement

User Guide
3. Select the adapters to include in the team.
4. Select "Adapter Fault Tolerance" or "Adaptive Load Balancing" and click
[Next].
5. Click [Finish].
6. If necessary to set the adapter priority setting, do as follows.
If not, go to step 7.
a.
b.
c.
d.
e.
f.
7. The setup will go back to [Intel (R) PROSet for Wired Connections] dialog
box, so click [OK].
8.
Restart the system.

Graphics Accelerator Driver

The standard graphics accelerator drivers that are mounted will be installed
automatically. Follow the procedure below if it is necessary to install manually.
If you want to use an optional Graphics Accelerator Driver board, follow the document
attached to the board to install the driver.
1. Insert the NEC ExpressBuilder into the optical disc drive. Close the Autorun
menu if it is displayed.
2. Click the Start menu, point to [Programs], [Accessories] and click [Windows
Explorer].
3. Run "setup.exe" in the following directory.
\001\win\winnt\dotnet\video\setup.exe.
4. Follow the on-screen message to proceed with the installation.
If the dialog message "Digital Signature could not been found." appears, select
[Yes] to continue.
5. Remove the NEC ExpressBuilder from the optical disc drive, follow the on-
screen instructions and restart the system.

SCSI Controller Driver

Update your system with the NEC ExpressBuilder DVD attached to your system.
The SCSI controller driver will be installed automatically.

Installing SAS Controller Driver (LSI SAS3443E-R)

Update your system with the NEC ExpressBuilder DVD attached to your system.
The SAS controller driver will be installed automatically.
Click [Settings] tab on [TEAM:xxx #yy Properties].
Click [Modify Team].
Point to the adapter [Intel(R)PRO/1000....]and click [Set Primary] or
[Set Secondary].
Click [OK].
The setup will go back to [EAM:xxx #yy Properties] and the priority
setting will display in list ().
Click [OK]
310
www.nec-computers.com

Advertisement

Table of Contents
loading

Table of Contents