NEC Express5800 120Rj-2 User Manual page 207

User Guide www.nec-computers.com
17. Connect the power cable to the backplane as shown in figure below.
Figure 180: Connecting the Cables to the Backplane
18. Insert the device carrier into the device bay until it locks.
Note: Be careful not to catch the connected power cable in
inserting the device carrier.
19. Route the USB cable as shown in the figure below.
Figure 181: Routing the SCSI Cable
20. Install the components you removed previously.
21. Install the device driver.
Refer to the manual that comes with the device.
207