NEC Express5800 120Rj-2 User Manual page 304

User Guide
15. The Express Setup will start when you click [Perform] in the [Start Express
setup] step.
16. Copy the optional Mass Storage Driver module.
If you install an optional Mass Storage Driver, the message will be shown.
Insert the CD-ROM or floppy disk attached to the Mass Storage Driver and
follow the on-screen messages.
17. Remove the NEC ExpressBuilder DVD from the optical disc drive when
prompted to do so.
If you proceed with the setup by using the setup parameters file, remove the
floppy disk from the floppy disk drive.
Insert the Windows Server 2003 CD-ROM into the optical disc drive.
The [Agree Software License Agreement] screen appears.
18. Read the contents carefully and click [Yes] if you agree. If you do not agree,
click [No].
■
If you do not agree to this agreement, the setup terminates
and Windows Server 2003 will not be installed.
■
If "NetWare Gateway (and Client) Service" is specified to
install, the window to specify the details of "NetWare Gate-
way (and Client) Service" pops up on the first logon. Specify
the appropriate value.
Caution
304
www.nec-computers.com