Logic Cover - NEC Express5800 120Rj-2 User Manual

User Guide

Logic Cover

Open the logic cover when installing/removing a DIMM, processor, and PCI add-in
card or reconnecting an internal cable.
Removal
1. See the section
2. Pull out the server from the rack.
3. Loosen a captive thumbscrew at the rear of the server.
4. Slide the logic cover toward the rear of the server and lift off the cover from the
server.
Installation
When installing the logic cover, check that the tab of the cover is securely inserted into
the slot in the server frame.
Slide the logic cover toward the front of the server and secure the cover with captive
thumbscrew.
"Preparing Your System for Upgrade" on page 137
Figure 90: Removing the Logic Cover
Figure 91: Replacing the Logic Cover
143
www.nec-computers.com
to prepare.