Muratec MFX-2590 Quick Manual page 96

6
Enter the sender name (your name or company name), and press [Enter]
• You can enter up to 22 characters for the sender name.
• For details on entering characters, refer to Chapter 1, "Entering Characters" in the
Administrator's Guide.
7
To register TTI
step 6.
Selecting the Default TTI
„
Select the TTI that will be used most often.
1
Press <Setting>.
2
Press the [Management] tab.
If an administrator password is set, enter the password and press [Enter].
3
Press [User Install].
4
Press [Default TTI].
2 and TTI 3, press [TTI 2] or [TTI 3], and repeat the operation in
Initial Setup (User Install)
.
1
2
3
3-11