2
Press [Color].
•
Scan format switches between "Mono" and "Color" each time you press [Color].
•
If [Color] is not displayed, press the [Advanced] tab and then select [Color].
3
Specify the destination, and press <Start>.
•
For details on the procedure, refer to "
•
If you loaded the document in the ADF, this concludes the procedure.
•
If you loaded the document on the document glass, load the next document, and press
[Next Doc]. To finish scanning, press [Complete].
Basic
Scanning".
(See page 1-2.)
Basic Scan Settings
1-23
1