4
Press [Lightness].
5
Select the lightness, and press [Enter].
6
Press [Close].
7
Specify the destination, and press <Start>.
For details on the procedure, refer to
Adjusting the RGB
You can set the ratio of R (red) to seven different levels, from -3 to +3.
-: Lessens red, and enhances cyan.
+: Enhances red, and lessens cyan.
-3
2-20
Advanced Scan Features
"Basic
-2
-1
Scanning".
(See page 1-2.)
0
+1
+2
+3