Dialing Options - Muratec MFX-2590 Quick Manual

„ Dialing Options
You can insert dialing options when entering fax numbers or when registering address
book destinations.
Name
Hyphen
Pause
Tone
Prefix
*1 To enter dialing options in PC faxes or in OfficeBridge, enter the options indicated in the
Option column.
1
Load the document, and press <Fax>.
2
Press the [Num. Keys] tab.
3
Enter the desired dialing option.
To select [-] or [Tone], press [Dialing Opt.] and select the desired dialing symbol.
4
Specify the destination, and press <Start>.
• For details on specifying the destination, refer to "
page 5-2.)
• If you loaded the document in the ADF, this concludes the procedure.
• If you loaded the document on the document glass, load the next document, and press
[Next Doc]. Press [Tx Start] to start transmission.
3-24 Basic Faxing
*1
Option
— Makes the entered fax number easier to see.
(Example) 111-1111-1111
/P This is used to open a space between dials. To increase the pause
time, enter multiple pause options. The time for each pause can also
be changed in the settings.
(Example) 2/P222-2222-2222
/T This is used to switch from pulse-dialing to tone-dialing. This option
may not be available in some countries and regions.
/N This is used to enter a prefix number. A prefix number can only be
used when specifying the destination using the numeric keys. To use
a prefix number, it is necessary to register it in advance.
7-44.)
(Example) /N333-3333-3333
Functions and Applications
(See page 7-43.)
Selecting from the Address
(See page
Book". (See