Editing The Message For Transmission (E-Mail Subject) - Muratec MFX-2590 Quick Manual

5
Select the color ratio for red, green, and blue, and press [Enter].
6
Press [Close].
7
Specify the destination, and press <Start>.
For details on the procedure, refer to

Editing the Message for Transmission (E-Mail Subject)

When transmitting a scanned image via e-mail, you can edit the body and subject of
the e-mail you're sending. You can also enter the body of the e-mail using a template
registered in advance.
Note
• For details on registering e-mail templates, refer to "
Templates"
Guide.
• This function can be used with Scan to e-mail.
1
Load the document, and press <Scan>.
2
Press the [Advanced] tab.
3
Press [e-mail Subject].
2-22 Advanced Scan Features
"Basic
(see page 7-45) or "Setting Templates" in Chapter 3 of the OfficeBridge
Scanning". (See page 1-2.)
Registering / Editing