13
Press <Start>.
•
If you selected a destination from the list of shortcuts, this step is not required.
•
If you loaded the document in the ADF, this concludes the procedure.
14
If you loaded the document on the document glass, load the next document, and
press [Next Doc].
To finish scanning, press [Complete].
15
Repeat step 14 to scan all the documents.
To finish scanning, press [Complete].
Note
•
You can register often-used destinations in the [Faves Destination] tab.
7-31.)
•
For details on registering shortcuts, refer to "
Shortcuts"
(see page 7-20)
OfficeBridge Guide.
•
You can press [Add/Edit] on the screen in step 3 to register/edit, or delete shortcuts.
For details on registration, refer to
page 7-24.)
•
You can press [Register] on the screen in step 11 to register the link in the shortcuts.
For details on registration, refer to
7-25.)
Registering / Editing FTP Server
or "Registering Shortcuts" in Chapter 3 of the
"Registering from an Operation
"Registering an Entered FTP
(See page
Screen".
(See
Server".
(See page
Basic Scanning
1-15
1