Scanning The Next Document (Next Document Setting) - Muratec MFX-2590 Quick Manual

3
Press [Scan Size].
If you loaded the document in the ADF, [Auto] is selected.
4
Select the scan size, and press [Enter].
5
Specify the destination, and press <Start>.
For details on specifying the destination, refer to

Scanning the Next Document (Next Document Setting)

You can scan a series of separate documents and transmit them as a single document.
For example, this enables you to scan an invoice using the ADF and a map using the
document glass, and send them together in a single transmission.
Note
The next document settings can be set separately for the ADF and the document glass.
1
Load the document, and press <Fax>.
2
Press the [Advanced] tab.
"Specifying Destinations".
Scan Related Settings
(See page 5-2.)
4-7
1
2
3
4