2
Press [Resolution].
If [Resolution] is not displayed, press the [Advanced] tab and then select [Resolution].
3
Select the desired resolution, and press [Enter].
4
Specify the destination.
•
For details on the procedure, refer to "
•
If you loaded the document in the ADF, this concludes the procedure.
•
If you loaded the document on the document glass, load the next document, and press
[Next Doc]. To finish scanning, press [Complete].
Setting the Scan Format
You can set whether to scan the document in color or monochrome.
1
Load the document, and press <Scan>.
For details on loading documents, refer to Chapter 1, "Loading Documents" in the User's
Guide.
1-22
Basic Scan Settings
Basic
Scanning".
(See page 1-2.)