Transmitting Both Sides Of The Document (Duplex Scan) - Muratec MFX-2590 Quick Manual

8
If you want to scan another document, repeat steps 6 to 7.
9
When you have finished scanning all the documents, press [Tx Start].

Transmitting Both Sides of the Document (Duplex Scan)

You can transmit both sides of a document.
Note
This setting is only available with the ADF.
1
Load the document on the ADF, and press <Fax>.
2
Press the [Advanced] tab.
3
Select [DuplexScan].
4
Select [Long Edge] or [Short Edge], and press [Enter].
To confirm the binding type of your document,
5
Specify the destination, and press <Start>.
For details on specifying the destination, refer to
see page 2-13.
"Specifying Destinations".
Scan Related Settings
(See page 5-2.)
4-9
1
2
3
4