Muratec MFX-2590 Quick Manual page 59

7
Enter the subject, and press [Enter].
• Up to 80 characters can be entered for the subject.
• For details on entering characters, refer to Chapter 1, "Entering Characters" in the
Administrator's Guide.
8
Press [Mail Text].
If you do not want to edit it, proceed to step 10.
9
Enter the mail text, and press [Enter].
• Up to 1024 characters can be entered for the message.
• Press [
• Press [ViewText] to confirm the mail text that has been entered. After confirming, press [Edit]
to return to the entry screen.
• For details on entering characters, refer to Chapter 1, "Entering Characters" in the
Administrator's Guide.
11
Press [Enter].
11
Specify the destination, and press <Start>.
For details on the procedure, refer to
2-24 Advanced Scan Features
] to enter a line break. A line break takes up two characters.
"Basic Scanning". (See page 1-2.)