Muratec MFX-2590 Quick Manual page 186

4
Select [ON].
Press [OFF] to disable the F-code polling setting. If you selected [OFF], press [Enter] and
proceed to step 8.
5
Press the sub-address entry box.
6
Enter the sub-address registered in the other machine using the numeric keys.
• Up to 20 digits can be entered for a sub-address.
• To delete one of the entered digits, press [Clear].
• To delete all of the entered digits, press [All Clear].
7
If a password is set, press the password entry box.
If a password is not set, proceed to step 9.
8
Enter the password using the numeric keys.
Up to 20 digits can be entered for a password. Numerals, # and * can be entered.
9
Press [Enter].
Press [F-Code Polling] again to return to the screen in step 4, where you can correct the sub-
address and/or password if entered incorrectly.
11
Specify the destination, and press <Start>.
For details on specifying the destination, refer to "Specifying Destinations".
F-Code Communications
(See page 5-2.)
4-39
1
2
3
4