Muratec MFX-2590 Quick Manual page 185

6
Enter the sub-address registered in the other machine using the numeric keys.
• Up to 20 digits can be entered for a sub-address.
• To delete one of the entered characters, press [Clear].
• To delete all of the entered characters, press [All Clear].
7
If a password is set, press the password entry box.
If a password is not set, proceed to step 9.
8
Enter the password using the numeric keys.
Up to 20 digits can be entered for a password. Numerals, # and * can be entered.
9
Press [Enter].
Press [F-Code Tx] again to return to the screen in step 4, where you can correct the sub-
address and/or password if entered incorrectly.
11
Specify the destination, and press <Start>.
For details on specifying the destination, refer to
page 5-2.)
„ F-Code Polling
Enter the sub-address and password to retrieve (polling) the documents stored in another
machine's bulletin box. First check the sub-address and password of the bulletin box in
the other machine.
1
Press <Fax>.
2
Press the [Advanced] tab.
3
Press [F-Code Polling].
4-38 F-Code Communications
"Specifying Destinations". (See