Manual Transmission - Muratec MFX-2590 Quick Manual

4
Press <Start>.
If you loaded the document in the ADF, this concludes the procedure.
5
If you loaded the document on the document glass, load the next document, and
press [Next Doc].
Press [Tx Start] to start transmission.
6
Repeat step 5 to scan all the documents.
To finish scanning, press [Tx Start].
Note
• For details on canceling transmission, refer to "
page 3-26.)
• Transmissions can be reserved while the machine is communicating. The reserved
transmission will start when the current job is completed. Up to 100 transmissions
can be reserved.

Manual Transmission

Use this method when the other fax machine uses manual reception, or when you want to
transmit after having a telephone conversation.
Note
• The optional handset is required when picking up the handset to transmit.
• Manual transmission cannot be performed from the document glass.
1
Load the document in the ADF, and press <Fax>.
• For details on loading documents, refer to Chapter 1, "Loading Documents" in the User's
Guide.
• Set the resolution and contrast as necessary.
2
Press the [Address Book] tab or the [Num. keys] tab.
Canceling / Checking
(See page 3-21.)
Basic Faxing
Faxes". (See
3-17
1
2
3