Canceling / Checking Faxes - Muratec MFX-2590 Quick Manual

5
Specify the destination, and press <Start>.
• For details on specifying the destination, refer to "
• If you loaded the document in the ADF, this concludes the procedure.
• If you loaded the document on the document glass, load the next document, and press
[Next Doc]. Press [Tx Start] to start transmission.
Note
Real time transmission is not possible using the document glass. Even if real time
transmission is set, the machine will automatically switch to memory transmission.

Canceling / Checking Faxes

You can cancel fax transmissions and check currently reserved transmissions. You can
also check the communication result of the latest fax jobs.
If there is a reserved fax, <Job Confirm.  Fax Cancel> illuminates.
„ Canceling / Checking the Current Document
You can cancel or check the current document. On the Review Jobs screen the following
statuses are displayed for each destination.
Reserved
Under execution Displayed for the destination currently being transmitted to.
Completed
Deleting
Redial
1
Press <Job Confirm.
The information for the current document is displayed.
3-26 Basic Faxing
<Illuminated>
Displayed for a destination that has not yet started transmission.
Displayed for a destination that has finished transmission.
Displayed after deleting a destination until the actual deletion process is
complete.
Displayed for a destination that is waiting for redialing.
 Fax Cancel>.
Specifying Destinations". (See page 5-2.)