3
Press [Next Document Setting].
4
Select [ON] and press [Enter].
If you select [OFF], the next document setting is disabled.
5
Specify the destination, and press <Start>.
•
If you do not set the next document settings, this completes the procedure.
•
For details on specifying the destination, refer to "
6
Load the next document to scan.
Set the resolution and contrast as necessary.
7
Press [Next Doc] or <Start>.
When the loaded documents have been scanned, the message "Set next document" is
displayed.
4-8
Scan Related Settings
Specifying
Destinations".
(See page 5-2.)