Basic Transmission Settings - Muratec MFX-2590 Quick Manual

6
Press <Start>.
If you loaded the document in the ADF, this concludes the procedure.
7
If you loaded the document on the document glass, load the next document, and
press [Next Doc].
Press [Tx Start] to start transmission.
8
Repeat step 7 to scan all the documents.
To finish scanning, press [Tx Start].
Note
For details on canceling transmission, refer to
3-26.)

Basic Transmission Settings

You can set the resolution and contrast in accordance with the document and its text, and
insert a dial number.
Note
You can also change the default settings, as necessary.
„ Setting the Resolution
Set the resolution to scan with according to the document.
• Normal: Select to scan a document with normal text.
• Fine: Select to scan a document with small text, such as a newspaper.
• S-Fine: Select to scan a document with detailed illustrations or fine text.
• Photo: Select this to scan photos.
• Background: Select this to scan while erasing the background (background pattern or color) of the
document.
1
Load the document, and press <Fax>.
2
Press the [Address Book] tab or the [Num. keys] tab.
"Canceling / Checking Faxes".
(See page 7-43.)
Basic Faxing
1
2
3
(See page
3-21